Kontron AT8404 CLI - Manual (Page 76)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 40
2.10.1 set gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on the system.
2.10.1.1 no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
2.10.2 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) or all
interfaces (Global Config mode). If an interface which has GARP enabled is enabled for routing or is enlisted as a
member of a port-channel (LAG), GARP functionality is disabled on that interface. GARP functionality is
subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface
that has GARP enabled.
2.10.2.1 no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP
functionality is disabled. GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG)
membership is removed from an interface that has GARP enabled.
2.10.3 show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.
Default disabled
Format set gmrp adminmode
Mode Privileged EXEC
Format no set gmrp adminmode
Mode Privileged EXEC
Default disabled
Format set gmrp interfacemode
Mode • Interface Config
• Global Config
Format no set gmrp interfacemode
Mode • Interface Config
• Global Config
Format show gmrp configuration { | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The slot/port of the interface that this row in the table describes.