Kontron AT8404 CLI - Manual (Page 199)

AT8404 Quality of Service (QoS) Commands
Page 3 - 25 AT8404 CLI Reference Manual
3.6.4 show diffserv service
This command displays policy service information for the specified interface and direction. The
parameter specifies a valid slot/port number for the system.
3.6.5 show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached. The inbound
direction parameter is optional.
The following information is repeated for interface and direction (only those interfaces configured with an attached
policy are shown):
3.6.6 show policy-map interface
This command displays policy-oriented statistics information for the specified interface and direction. The port> parameter specifies a valid interface for the system.
Format show diffserv service in
Mode Privileged EXEC
Term Definition
DiffServ Admin
Mode
The current setting of the DiffServ administrative mode. An attached policy is only in effect on
an interface while DiffServ is in an enabled mode.
Interface Valid slot and port number separated by a forward slash.
Direction The traffic direction of this interface service.
Operational Status The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
Policy Details Attached policy details, whose content is identical to that described for the show policy-map
command (content not repeated here for brevity).
Format show diffserv service brief [in]
Mode Privileged EXEC
Term Definition
DiffServ Mode The current setting of the DiffServ administrative mode. An attached policy is only active on
an interface while DiffServ is in an enabled mode.
Term Definition
Interface Valid slot and port number separated by a forward slash.
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
Note: This command is only allowed while the DiffServ administrative mode is enabled.