Kontron AT8404 CLI - Manual (Page 268)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 54
4.11.9.1 no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
4.11.10 debug ip igmp packet
Use this command to trace IGMP packet reception and transmission. receive traces only received IGMP packets
and transmit traces only transmitted IGMP packets. When neither keyword is used in the command, then all IGMP
packet traces are dumped. Vital information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or transmitted is displayed on the console.
4.11.10.1 no debug ip igmp packet
Use this command to disable debug tracing of IGMP packet reception and transmission.
4.11.11 debug ip mcache packet
Use this command for tracing MDATA packet reception and transmission. receive traces only received data packets
and transmit traces only transmitted data packets. When neither keyword is used in the command, then all data
packet traces are dumped. Vital information such as source address, destination address, packet length, and the
interface on which the packet is received or transmitted is displayed on the console.
4.11.11.1 no debug ip mcache packet
Use this command to disable debug tracing of MDATA packet reception and transmission.
4.11.12 debug lacp packet
This command enables tracing of LACP packets received and transmitted by the switch.
Format no debug ip acl
Mode Privileged EXEC
Default disabled
Format debug ip igmp packet [receive|transmit]
Mode Privileged EXEC
Format no debug ip igmp packet [receive|transmit]
Mode Privileged EXEC
Default disabled
Format debug ip mcache packet [receive|transmit]
Mode Privileged EXEC
Format no debug ip mcache packet [receive|transmit]
Mode Privileged EXEC
Default disabled