Kontron AT8404 CLI - Manual (Page 261)

AT8404 Utility Commands
Page 4 - 47 AT8404 CLI Reference Manual
4.10.2 ip domain name
Use this command to define a default domain name that FASTPATH software uses to complete unqualified host
names (names with a domain name).
By default, no default domain name is configured in the system. <name> may
not be longer than 255 characters and should not include an initial period. This <name> should be used only when
the default domain name list, configured using the ip domain list command, is empty.
Example: The CLI command ip domain name yahoo.com will configure yahoo.com as a default domain
name. For an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to
xxx.yahoo.com.
4.10.2.1 no ip domain name
Use this command to remove the default domain name configured using the ip domain name command.
4.10.3 ip domain list
Use this command to define a list of default domain names to complete unqualified names. By default, the list is
empty. Each name must be no more than 256 characters, and should not include an initial period. The default
domain name, configured using the ip domain name command, is used only when the default domain name list
is empty. A maximum of 32 names can be entered in to this list.
4.10.3.1 no ip domain list
Use this command to delete a name from a list.
4.10.4 ip name server
Use this command to configure the available name servers. Up to eight servers can be defined in one command or
by using multiple commands. The parameter is a valid IP address of the server. The
preference of the servers is determined by the order they were entered.
Default none
Format ip domain name
Mode Global Config
Format no ip domain name
Mode Global Config
Default none
Format ip domain list
Mode Global Config
Format no ip domain list
Mode Global Config
Format ip name-server <server-address1> [server-address2...server-address8]
Mode Global Config