Kontron AT8404 CLI - Manual (Page 134)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 98
When the optional arguments > or are not used, the command displays the following
information:
When you specify the > values, the following information appears:
When you specify a value for , the following information appears:
2.18.10 show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Term Definition
Admin Mode Indicates whether or not IGMP Snooping is active on the switch.
Multicast Control
Frame Count
The number of multicast control frames that are processed by the CPU.
Interface Enabled
for IGMP Snooping
The list of interfaces on which IGMP Snooping is enabled.
VLANS Enabled for
IGMP Snooping
The list of VLANS on which IGMP Snooping is enabled.
Term Definition
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the interface.
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the interface.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group on a
particular interface before deleting the interface from the entry.This value may be configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface because it did not
receive a report for a particular group on that interface. This value may be configured.
Multicast Router
Expiry Time
The amount of time to wait before removing an interface from the list of interfaces with
multicast routers attached. The interface is removed if a query is not received. This value may
be configured.
Term Definition
VLAN ID The VLAN ID.
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the VLAN.
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group on a
particular interface, which is participating in the VLAN, before deleting the interface from the
entry.This value may be configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface, participating in the
VLAN, because it did not receive a report for a particular group on that interface. This value
may be configured.
Multicast Router
Expiry Time
The amount of time to wait before removing an interface that is participating in the VLAN from
the list of interfaces with multicast routers attached. The interface is removed if a query is not
received. This value may be configured.
Format show igmpsnooping mrouter interface
Mode Privileged EXEC