Kontron AT8404 CLI - Manual (Page 288)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 12
5.4.4 sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be established. A value of 0
indicates that no ssh connection can be established. The range is 0 to 5.
5.4.4.1 no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default value.
5.4.5 sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as long as the session
has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also,
any keystroke activates the new timeout duration.
5.4.5.1 no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also,
any keystroke activates the new timeout duration.
5.4.6 show ip ssh
This command displays the ssh settings.
Mode Privileged EXEC
Default 5
Format sshcon maxsessions <0-5>
Mode Privileged EXEC
Format no sshcon maxsessions
Mode Privileged EXEC
Default 5
Format sshcon timeout <1-160>
Mode Privileged EXEC
Format no sshcon timeout
Mode Privileged EXEC
Format show ip ssh
Mode Privileged EXEC