Kontron AT8404 CLI - Manual (Page 230)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 16
4.4.10 show sysinfo
This command displays switch information.
4.4.11 show tech-support
Use the show tech-support command to display system and configuration information when you contact
technical support. The output of the show tech-support command combines the output of the following
commands:
• show version
• show sysinfo
• show port all
• show logging
• show event log
• show logging buffered
• show trap log
• show running config
4.4.12 terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e. pagination, for the show
running-config and show running-config all commands. The terminal length size is either zero or a
number in the range of 5 to 48. After the user-configured number of lines is displayed in one page, the system
prompts the user for --More-- or (q)uit. Press q or Q to quit, or press any key to display
Format show running-config [all | ]
Mode Privileged EXEC
Format show sysinfo
Mode Privileged EXEC
Term Definition
Switch Description Text used to identify this switch.
System Name
Name used to identify the switch.The factory default is blank. To configure the system name,
see 5.8.1 “snmp-server“ on page 5 - 21.
System Location Text used to identify the location of the switch. The factory default is blank. To configure the
system location, see 5.8.1 “snmp-server“ on page 5 - 21.
System Contact Text used to identify a contact person for this switch. The factory default is blank. To configure
the system location, see 5.8.1 “snmp-server“ on page 5 - 21.
System ObjectID The base object ID for the switch’s enterprise MIB.
System Up Time The time in days, hours and minutes since the last switch reboot.
MIBs Supported A list of MIBs supported by this agent.
Format show tech-support
Mode Privileged EXEC