Kontron AT8404 CLI - Manual (Page 320)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 44
5.10.4 key
Use the key command in TACACS Configuration mode to specify the authentication and encryption key for all
TACACS communications between the device and the TACACS server. This key must match the key used on the
TACACS daemon. The parameter specifies the key name. For an empty string use “ ”. (Range: 0
- 128 characters).
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted format. When you
save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in
encrypted format, enter the key along with the encrypted keyword. In the show running config command’s display,
these secret keys are displayed in encrypted format. You cannot show these keys in plain text format.
5.10.5 port
Use the port command in TACACS Configuration mode to specify a server port number. The server number> range is 0 - 65535.
5.10.6 priority
Use the priority command in TACACS Configuration mode to specify the order in which servers are used, where
0 (zero) is the highest priority. The parameter specifies the priority for servers. The highest priority is
0 (zero), and the range is 0 - 65535.
5.10.7 timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in seconds. If no timeout
value is specified, the global value is used. The parameter has a range of 1-30 and is the timeout value
in seconds.
5.10.8 show tacacs
Use the show tacacs command to display the configuration and statistics of a TACACS+ server.
Format key
[
| encrypted ]
Mode TACACS Config
Default 49
Format port
Mode TACACS Config
Default 0
Format priority
Mode TACACS Config
Format timeout
Mode TACACS Config
Format show tacacs []
Mode Privileged EXEC