Rockwell Automation 592- E300 Overload Relay User Manual - Manual (Page 308)

308 Rockwell Automation Publication 193-UM015B-EN-P - June 2014
Chapter 8 EtherNet/IP Communications
5. Type the information into the e-mail notification fields as stated below.
Multiple e-mail addresses can be entered into the E-mail Recipient field by
separating each e-mail address with a semicolon (;). The E-mail Recipient
field is limited to 255 characters.
6. Check the desired notification time, fault conditions, and local conditions
to be included in notification e-mails to the recipient. These can be
changed after the initial configurations.
7. Click Apply to accept the configuration
8. When an E300 Electronic Overload Relay event occurs, the e-mail
message will look like the following:
E-mail Recipient The e-mail address of the person who will receive the notifications.
E-Mail Sender The e-mail address from which the notification will be sent.
SMTP Server Consult with the network administrator for the SMTP server address.
SMTP Username Consult with the network administrator for the SMTP username.
SMTP Password Consult with the network administrator for the SMTP password.
SMTP Port Consult with the network administrator which SMTP port number to
use. Port 25 is the most common SMTP port.