Rockwell Automation 592- E300 Overload Relay User Manual - Manual (Page 307)

Rockwell Automation Publication 193-UM015B-EN-P - June 2014 307
EtherNet/IP Communications Chapter 8
E-mail Configuration
To be able to send an e-mail, the IP address of the hostname of a Simple Mail
Transfer Protocol (SMTP) server must be configured and notifications must be
selected. Follow these steps to configure an e-mail notification.
1. In the web browser, enter the IP address of the E300 Electronic Overload
Relay EtherNet/IP Communication Module URL of the web browser.
2. Select Administrative Settings>Device Identity
3. Type the Device Identity information into the fields as described below
and press Apply.
4. Select Administrative Settings>E-Mail Configuration
Device Name The name of the E300 Electronic Overload Relay.
Device Description The description of the E300 Electronic Overload Relay.
Device Location The location of the E300 Electronic Overload Relay.
Contact Information The contact information for the E300 Electronic Overload Relay.