Apple Motion 2 - Manual (Page 779)

Chapter 10 Using Filters 779
Parameters in the Inspector
Dissolve Amount: Sets the percentage of pixels dissolved by noise.
Random Seed: Sets a number to be used as a seed for noise placement. Values range
from 0 to 1000.
Dashboard controls
The Dashboard contains the Dissolve Amount and Random Seed controls.
Noise Dither
Adds a small amount of noise to the pixels of an object, used to soften the banding
seen on 8-bit images with subtle gradients.
Parameters in the Inspector
Noisiness: Sets the amount of noise added to the object. Values range from 0 to 1.
Movement: Toggles animation of the noise on and off.
Dashboard controls
The Dashboard contains the Noisiness control.
Pixellate
This filter turns an image into a mosaic of blocks using colors taken from an object. The
scale of the blocks can be increased or decreased.
Parameters in the Inspector
Center: Sets the position of the center of the pixellation effect.
Scale: Sets the scale of the pixellation. Values range from 1 to 100.
Dashboard controls
The Dashboard contains the Scale control.
Original image Pixellate applied
01112.book Page 779 Sunday, March 13, 2005 10:36 PM