Apple Motion 2 - Manual (Page 752)

752 Chapter 10 Using Filters
Parameters in the Inspector
Center: Sets the position of the center of the stripe effect.
Angle: Sets the angle of the stripes.
Offset: Sets the angle of pixel sampling used for sampling pixel color values.
Dashboard controls
The Dashboard contains the Angle and Offset controls.
Target
Similar to the Stripes filter, but draws bands of concentric circles outward from the
center point value. The target colors are derived from pixel values around the selected
center point, with the distribution of colors determined by the Angle parameter.
Parameters in the Inspector
Center: Sets the position of the center of the target.
Angle: Sets the angle of the line used to select pixels for the bands of circles in the
target.
Dashboard controls
The Dashboard contains the Angle control.
Twirl
Twirls an image like a fork twisting a plate of spaghetti. The image appears to stretch
from the sides to the center around in a spiral. The amount of spiraling is determined
by the Twirl parameter.
Parameters in the Inspector
Amount: Sets the amount of the twirl. Values range from 0 (no twirl) to 1.00 (maximum
twirl).
Original image Target applied
01112.book Page 752 Sunday, March 13, 2005 10:36 PM