Apple Motion 2 - Manual (Page 399)

Chapter 5 Using Behaviors 399
7 Now it’s time to make the pendulum swing. Select the pendulum object. You should
have already adjusted its anchor point to be at the top. This way, the bottom pendulum
object will swing properly. Open the Behaviors tab, Control-click the Rotation
parameter, but this time choose Oscillate from the shortcut menu to add the Oscillate
parameter behavior.
8 Open the Behaviors tab. Reduce the Oscillate behavior’s amplitude to 20 so that the
pendulum object doesn’t swing so widely. Then, increase the speed to 50 in keeping
with the overall fast-forward motion of the clock. You’re done!
01112.book Page 399 Sunday, March 13, 2005 10:36 PM