Apple Motion 2 - Manual (Page 727)

Chapter 10 Using Filters 727
Parameters in the Inspector
Shadow Red: Picks the color gain applied to the shadow range of the red color
channel. Values range from –1.0 (no color) to 0 (unaltered color) to 1.0 (maximum color).
Shadow Green: Picks the color gain applied to the shadow range of the green color
channel.
Shadow Blue: Picks the color gain applied to the shadow range of the blue color
channel.
Midtone Red: Picks the color gain applied to the midtone range of the red color
channel.
Midtone Green: Picks the color gain applied to the midtone range of the green color
channel.
Midtone Blue: Picks the color gain applied to the midtone range of the blue color
channel.
Highlight Red: Picks the color gain applied to the highlights of the red color channel.
Highlight Green: Picks the color gain applied to the highlights of the green color
channel.
Highlight Blue: Picks the color gain applied to the highlights of the blue color channel.
Dashboard controls
The Dashboard contains the same controls as the Inspector.
Color Reduce
Reduces the full range of color in an image down to two, three, or four colors that you
select. Depending on the number of substitute colors you choose in the Reduce To
parameter, this filter breaks down the full range of colors in the image into a color
range for each Match Color parameter that’s available. It then substitutes the selected
Replace With color for each interpreted range of color.
01112.book Page 727 Sunday, March 13, 2005 10:36 PM