Apple Motion 2 - Manual (Page 735)

Chapter 10 Using Filters 735
Dashboard controls
There are no controls for this filter in the Dashboard.
Saturate
Increases or decreases the amount of color in an image by a specified amount. This
filter can be used to mute the color in an image, making brighter colors less saturated.
It can also be used to completely eliminate the color from an image, turning a color
image to a grayscale one.
Parameters in the Inspector
Saturation: Sets the color saturation of the object, ranging from -1.0 (no color
information) to 0.0 (unadjusted color) to 3.0.
Dashboard controls
The Dashboard contains the same control as the Inspector.
Sepia
Tints an overall object with a sepia tone. The blacks and whites are remapped to dark
and light sepia colors. The amount of tinting can be adjusted, to achieve either a subtle
mix of the original and tinted colors, or a completely tinted image.
This filter is good for that “old-time western” look.
Parameters in the Inspector
Intensity: Sets the amount of sepia tone applied to the object. Values range from 0 (no
sepia tone) to 1.00 (100 percent sepia).
Dashboard controls
The Dashboard contains the same control as the Inspector.
01112.book Page 735 Sunday, March 13, 2005 10:36 PM