Apple Motion 2 - Manual (Page 742)

742 Chapter 10 Using Filters
Parameters in the Inspector
Center: Sets the position of the center of the droplet effect.
Radius: Sets the radius of the droplet effect. Values range from –50 to 950.
Height: Sets the height of the droplet ripples. Values range from –50 to 50.
Width: Sets the width of the rippling waves from the droplet. Values range from 0
to 100.
Dashboard controls
The Dashboard contains the Radius, Height, and Width controls.
Earthquake
Creates an animated displacement effect on an object, adjusting its position as if
shaken by an earthquake.
Parameters in the Inspector
Twist: Sets the amount the object is rotated as it is displaced. Values range from 0 to 1.
Horizontal Shake: Sets the maximum amount the image is displaced horizontally.
Values range from 0 to 1.
Vertical Shake: Sets the maximum amount the image is displaced vertically. Values
range from 0 to 1.
Motion Blur: Sets the amount of motion blur applied to the object. Values range from
1 to 8.
Dashboard controls
The Dashboard contains the Twist, Horizontal Shake, Vertical Shake, and Motion Blur
controls.
Original image Earthquake applied with threelayers
01112.book Page 742 Sunday, March 13, 2005 10:36 PM