Apple Motion 2 - Manual (Page 617)

Chapter 8 Working With Particles 617
4 To make the particles generated by each different cell mingle together, select the
emitter, open the Inspector, and turn on the Interleave Particles parameter.
5 Now, select the Flare01 cell in the Layers tab to adjust its parameters, which
automatically appear in the Inspector.
6 Adjust the Scale slider to 10 to reduce the size of the particles generated by this cell.
7 Select the Spark12 cell in the Layers tab (the Inspector automatically updates to show
its parameters) and set the scale to 60.
The resulting image should look approximately like this:
01112.book Page 617 Sunday, March 13, 2005 10:36 PM