Metrohm tiamo 2.3 (process analysis) - Manual (Page 70)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Variable name Description Data
type
STO Indication whether the determination has been stopped (manual stop, stop via
SEND command, emergency stop) or terminated normally ; 1 = stopped, 0 =
terminated normally Number
2.4.3.8 Common variables
Dialog window: Formula Editor ▶ Variables
Common variables are global variables, which are adopted from the corre-
sponding table of the program part Configuration, where the common
variables can be defined, at the start of the determination and assigned to
the determination. The Variables field of the Formula editor lists all Com-
mon Variables which are available for the current method, sorted
according to name.
Syntax
'CV.Variable name.Variable name'
Examples: 'CV.TestDate', 'CV.TestTime.VAL', 'CV.Average-
Temp.UNI'
You can select the common variables directly in the formula editor under
Variables/Common Variables in order to avoid syntax errors.
Available Common Variables
Variable name Description Data
type
VAL Value of the Common Variable (facultative, i.e. 'CV.Test.VAL' = 'CV.Test') Text,
number
or date/
time
UNI Unit of the Common Variable Text
2.4.3.9 Global variables
Dialog window: Formula Editor ▶ Variables
Global variables are client-embracing variables, which are adopted from
the corresponding table of the program part Configuration, where the
global variables can be defined, at the start of the determination and
assigned to the determination. The field Variables of the formula editor
lists all Global variables which are available for the current method, sor-
ted according to name.
Syntax
'GV.Variable name.Variable name'
Examples: 'GV.TestDate', 'GV.TestTime.VAL', 'GV.Average-
Temp.UNI'