4 properties - digital inputs, 1 properties digital input, Properties - digital inputs 9 – Metrohm tiamo 2.3 (process analysis) User Manual
Page 1655
■■■■■■■■■■■■■■■■■■■■■■
7 Instruments
tiamo 2.3 (for Process Analysis)
■■■■■■■■
1639
7.21.4
Properties - Digital inputs
On the tab Digital inputs all inputs detected are automatically listed in a
table. For each digital input the port description can be modified.
Port
Display of the internal description of the port.
Port description
Display of the port description.
Port specification
Shows the specifications of the port.
Type
Display of the port type.
Delayed edge
Display of edge type (ascending or descending).
Delay time
Time delay before the input signal will be registered on the ascending od
descending edge.
Invert signal
If this checkbox is activated the input signal will be evaluated invertedly.
[Edit]
Opens the dialog Properties Digital input in order to edit the selected
port.
[Port description]
Opens a menu in order to import or export port descriptions.
The menu [Port description] contains the following menu items:
Import
Import of a text file (*.txt; *.csv) containing the port description. Each line is
interpreted as port description, spaces will be ignored.
Export
Export a text file containing the port descriptions of all digital inputs.
7.21.4.1
Properties Digital input
Dialogfenster: Configuration
▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
▶ Digital inputs ▶ [Edit] ▶ Properties Digital Input
In the dialog window Properties Digital input the properties of the
individual digital inputs are set.