Metrohm tiamo 2.3 (process analysis) User Manual
Page 1362
6.3 Configuration data
■■■■■■■■■■■■■■■■■■■■■■
1346
■■■■■■■■
tiamo 2.3 (for Process Analysis)
Rack data
on | off (Default value: on)
Import configuration data for sample changer racks (see Chapter 6.12.1,
page 1473).
Sample solutions (TC conductivity)
on | off (Default value: on)
Import the configuration data for calculating the temperature coefficients
of sample solutions (see Chapter 6.11.2, page 1466).
Colorimetric sensors
on | off (Default value: on)
Import configuration data for colorimetric sensors (see Chapter 6.8.2,
page 1436).
Configuration views
on | off (Default value: on)
Import saved configuration views (see Chapter 3.1.7, page 98).
Workplace views
on | off (Default value: on)
Import saved workplace views (see Chapter 3.1.7.1, page 98).
Database views
on | off (Default value: on)
Import saved database views (see Chapter 3.1.7, page 98).
Result templates
on | off (Default value: on)
Import saved result templates (see Chapter 5.6.8.2.6.1, page 1244).
Control chart templates
on | off (Default value: on)
Import saved control card templates (see Chapter 4.4.2.1, page 248).
Overlay curve templates
on | off (Default value: on)
Import saved curve overlay templates (see Chapter 4.4.3.1, page 252).