Metrohm tiamo 2.3 (process analysis) - Manual (Page 1647)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1631
Selection 'Port description' | Calculated value
'Port description'
All analog input ports can be selected.
0% Mapping
Measured value to be used when the Low level (0%) is applied as input
value.
Can be edited only for controlled variable = calculated value, other-
wise grayed-out and not available for editing.
Range -214783647.000 ... 214783647.000
Default value 0 or controlled variable setting, respectively
100% Mapping
Measured value to be used when the High level (100%) is applied as
input value.
Can be edited only for controlled variable = calculated value, other-
wise grayed-out and not available for editing.
Range -214783647.000 ... 214783647.000
Default value 100 or controlled variable setting, respec-
tively
Unit
Unit of the measured value to be used.
Can be edited only for controlled variable = calculated value, other-
wise grayed-out and not available for editing.
Input 50 characters
Default value % or controlled variable unit, respectively
Default value
Selection or input of the standard value which is to be used for the input if
the result is invalid.
Range 0% mapping of the input ... 100% mapping
of the input
Selection last value | setpoint value
Default value last value
Setpoint value
Setpoint value to which the control is to be set.