Metrohm tiamo 2.3 (process analysis) - Manual (Page 280)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
264 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
+ Determination data
+ Method data
+ Sample data
+ Results overview
+ Single results
+ Command variables
+ Common variables
+ Global variables
+ Device data
+ Sensor data
+ dynamic=""> Sample solutions (TC conductivity)
+ Electrode test
+ Data of the colorimetric sensors.
+ Method parameters
+ Statistical data
– System data
User name (short name)
User name (full name)
Client name
Program version - Build number
License code
Note
dynamic= means that the following nodes can appear more than
once.
The actual data is situated between " ".