Metrohm tiamo 2.3 (process analysis) - Manual (Page 1765)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1749
9.8.3 Loading working sample table
How to proceed?
1 Select program part Workplace.
2 In subwindow Run, click on the Determination series tab.
3 Click on the menu item Sample table ▶ Load....
The dialog window Load sample table opens.
4 Select desired sample table.
5 Click on [Load].
The data of the selected sample table is loaded into the working
sample table.
9.8.4 Edit working sample table
How to proceed?
1 Select program part Workplace.
2 In subwindow Run, click on the Determination series tab.
3 If desired, load existing sample table into working sample table.
4 If desired, click on the menu item Sample table ▶ Properties... in
the subwindow Run.
The dialog window Properties - Determination series opens.
5 Define the properties for the determination series.
6 Click on [OK].
The dialog window Properties - Determination series is closed.
7 Select line to be modified in the subwindow Run.
8 Click on the menu item Edit ▶ Edit line.
The dialog window Edit line opens.