Metrohm tiamo 2.3 (process analysis) - Manual (Page 1681)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1665
[Start]
Start moving to the target position. After the start, the button changes to
[Stop], the two lower buttons are shown as inactive (gray) and Move…
instead of Ready is displayed as status message.
Move to current rack position –1.
Move to current rack position +1.
Lift position
Set the lift position for the selected tower.
Current position
Shows the current lift position in mm.
Target position
Selection or entry of the lift position that is to be moved to for the current
rack position (normal beaker, special beaker, external position).
Range 0 ... max. stroke path defined (235 mm) mm
Default value 235 mm
Selection Home position | Work position | Shift position
| Rinse position | Special position
Shift position
For normal beakers and external positions only.
Rinse position
For normal beakers and external positions only.
Special position
For normal beakers and external positions only.
Lift rate
Lift rate for manual control on the selected tower.
730, 778, 789, 814, 815, 855, 864
Range
5 ... 25 mm/s
Default value 25 mm/s
774, 874
Range
3 ... 12 mm/s
Default value 12 mm/s