Metrohm tiamo 2.3 (process analysis) - Manual (Page 1418)

6.6 Subwindow Titrants/Solutions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1402 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Note
Default values have already been entered for the tubing parameters;
these correspond to the dimensions of the standard tubing supplied. If
you do not make any modifications to the tubing connections then you
do not need to modify the tubing parameters. For information on
length and diameter of other tubing see Products/Accessories and
columns under
http://products.metrohm.com .
Dosing tip
Length
Length of the tubing connecting the cock to the dosing tip.
Range 0.0 ... 999.9 cm
Default value 40.0 cm
Diameter
Diameter of the tubing connecting the cock to the dosing tip.
Range 0.0 ... 9.9 mm
Default value 2.0 mm
Cylinder
Length
Length of the tubing connecting the cock to the cylinder.
Range 0.0 ... 999.9 cm
Default value 13.0 cm
Diameter
Diameter of the tubing connecting the cock to the cylinder.
Range 0.0 ... 9.9 mm
Default value 2.0 mm
Reagent bottle
Length
Length of the tubing connecting the cock to the reagent bottle.
Range 0.0 ... 999.9 cm
Default value 25.0 cm
Diameter
Diameter of the tubing connecting the cock to the reagent bottle.