Metrohm tiamo 2.3 (process analysis) - Manual (Page 128)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
112 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Selection Sample table test running… | Sample table
test stopped manually | Sample table test fin-
ished without errors | Sample table test fin-
ished with errors
Sample table test running…
This display appears during the test run. A progress bar also appears;
the test can be interrupted thereby by means of the [x] next to the bar.
Sample table test stopped manually
This display appears if the sample table test was canceled manually by
the user.
Sample table test finished without errors
This display appears at the end of a sample table test that has been
completed without errors.
Sample table test finished with errors
This display appears if an error has occurred during the sample table
test. The errors that occured are listed in the Test report field.
Test report
Display of errors that occurred during the sample table test, together with
line numbers.
3.3.1.9 Save sample table
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Sample
table] ▶ Save as… ▶ Save sample table
A name for the working sample table to be saved can be entered or selec-
ted in this dialog window.
List of sample tables
The list of sample tables contains information about all the saved sample
tables.
Name
Name of the sample table.
Saved
Date and time when the sample table was saved.
Saved by
Short name of the user who saved the sample table.
Lines
Number of lines in the sample table.