Metrohm tiamo 2.3 (process analysis) - Manual (Page 445)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 429
User group
Names of the user groups
Execute
on | off (Default value: on)
Authorization to start methods from a method group. Methods in this
group can only be opened and started but can not be edited or deleted.
Edit
on | off (Default value: on)
Authorization to edit methods from a method group. Methods in this
group can be opened, started, edited and deleted. New methods can be
added as well.
5.5 Tracks
5.5.1 Tracks - General
Subwindow: Method
Definition
A track is a partial sequence of a method comprised of commands. In
addition to the main track that is present in each method, there are also
normal tracks which are generated by the user and called up with a
CALL command and special tracks (series start track, series end track,
exit track and error track), which cannot be called up but which are star-
ted automatically with certain events.
Structure
Each track contains a START or TRACK command respectively and an
END command, between which as many commands can be inserted as
needed.