Metrohm tiamo 2.3 (process analysis) - Manual (Page 1593)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1577
Determination ID
ID of the determination the dark spectrum has been recorded in.
The determination ID can be copied and pasted into another field.
Integration time
Display of the integration time at recording the dark spectrum.
Averaged spectra
Number of spectra recorded and averaged.
Smoothing
Display of the number of neighbor pixels the light intensity of each pixel
has been determined with.
Spectrum
Display of the dark spectrum. The graph can be zoomed with the mouse.
By double-clicking the whole spectrum is displayed again.
x axis
Display of the wavelength. Unit nm.
y axis
Display of the intensity. Unit Counts.
7.15.7 Properties - Reference spectrum
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Reference spectrum
On this tab information on the reference spectrum stored in the device is
displayed.
If no reference spectrum has been recorded yet or the calibration has
been reset to factory settings, -- is displayed in the fields.
Date
Display of date and time the reference spectrum has been recorded.
User
Display of the user logged in during recording of the reference spectrum.
Method
Display of the method the reference spectrum has been recorded with.
Determination ID
ID of the determination the reference spectrum has been recorded in.