Metrohm tiamo 2.3 (process analysis) - Manual (Page 1301)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1285
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
5.6.10.6.2 SEQUENCE - Properties
Dialog window: Method ▶ SEQUENCE ▶ Properties... ▶ SEQUENCE - Sequence #
Command name
Name of the command.
Input 25 characters
As many commands as one likes can be inserted in a SEQUENCE com-
mand. They will then be displayed in the command table, which contains
information concerning Command type and Command name. The
table itself cannot be edited. The individual lines in the table can be edited
with a context-sensitive menu.
Moves the selected command up (changes the sequence).
Moves the selected command down (changes the sequence).
[New]
Opens the dialog window New command for selecting the desired com-
mand which is to be inserted at the end of the table (see Chapter
5.2.4.2.1, page 409).
[Properties]
Opens the dialog window for the selected command (see Chapter
5.2.4.2.1, page 409).
[Delete]
Deletes the selected command.
Copy
Cut Use this context-sensitive menu item to delete the commands selected from the
table and copy them onto the clip board.