Metrohm tiamo 2.3 (process analysis) - Manual (Page 456)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
440 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
￭ SEQUENCE
Combines several commands to one command.
￭ SET
Set endpoint titrations.
￭ START
Start command for the main track.
￭ STAT
STAT Titration.
￭ STDADD auto
Standard addition with automatic addition of the standard addition
solution from a dosing device in such a way that a constant potential
difference results.
￭ STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
￭ STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
￭ STEPPING MOTOR
Standard addition with manual addition of the standard addition solu-
tion.
￭ STIR
Controlling a connected stirrer.
￭ SWING
Swinging of the robotic arm (with Swing Head only).
￭ TET
Thermometric titrations.
￭ TRACK
Start command for the normal track.
￭ TRANSFER
Data transfer via RS-232 to external devices or programs.
￭ WAIT
Interrupts the method run.
￭ WEIGH
Interrupts the method run.
5.6.2 Track commands
5.6.2.1 Track commands - Overview
Menu item: Method ▶ Insert ▶ New track...
The following track commands exist for the different tracks:
￭ START
Start command for (see Chapter 5.5.2.1, page 430).
￭ TRACK
Start command for (see Chapter 5.5.2.2, page 431).