Metrohm tiamo 2.3 (process analysis) - Manual (Page 201)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 185
MEAS
Selection
Measured value | Time | Temperature | dMW/
dt | Calculated 1…3 | External 1…3
Default value Measured value
MEAS T/Flow
Selection
Measured value | Time | Flow | Calculated 1…
3 | External 1…3
Default value Measured value
MEAS TC Cond
Selection
Temperature | Measured value | Time | dMW/
dt | Calculated 1…3 | External 1…3
Default value Measured value
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | d
ε/dt |
Calculated 1...3 | External 1...3
Default value Measured value
DOS
Selection
Volume | Measured value | Temperature | Time
| dV/dt | Calculated 1…3 | External 1…3
Default value Volume
TET
Selection
Volume | Measured value | dT/dV | ERC | Time |
Calculated 1…3 | External 1…3
Default value Measured value
Color
Selection of the curve color for the quantity to be shown on the y1 axis.
Selection Color selection | blue
Default value blue
y2 axis
Selection of the quantity to be shown on the y2 axis (right y axis).
DET
Selection
off | Measured value | Volume | Time | Temper-
ature | ERC | Calculated 1…3 | External 1…3
Default value off