Metrohm tiamo 2.3 (process analysis) - Manual (Page 1302)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1286 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Paste Use this context-sensitive menu item to paste the commands at the end of the
table that were copied onto the clip board.
5.6.11 Process analysis commands
5.6.11.1 Process analysis commands - Overview
Menu item: Method ▶ Insert ▶ New command...
Commands for controllers which are controlled by process analysis
instruments.
The following commands can be selected:
￭ DIGITAL OUT
Actuation of digital outputs.
￭ DIGITAL IN
Loading of digital inputs.
￭ ANALOG OUT
Outputting of results as analog values.
￭ ANALOG IN
Loading of analog inputs.
￭ STEPPING MOTOR
Actuation of a stepping motor.
￭ PORT
Actuating a multi-port valve
￭ CONTROL
Controlling Beckhoff instruments.
5.6.11.2 DIGITAL OUT
5.6.11.2.1 DIGITAL OUT - Overview
Dialog window: Method ▶ DIGITAL OUT ▶ Properties... ▶ DIGITAL OUT - 'Com-
mand name'
Devices
This command can be executed with the IO Controller and with the Step-
ping Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
Digital outputs can be actuated two different ways: