Metrohm tiamo 2.3 (process analysis) - Manual (Page 32)

1.10 What is new in tiamo 2.3? ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
￭ If the axial distance was redefined and tiamo shut down and restarted
with sample changers, then the axial distance was reset to the previous
value.
￭ If Password monitoring by Windows was set in the security set-
tings and if the check box Maximum number of login attempts
was activated, then the number of incorrect login attempts was not
updated at the time of Windows login.
￭ The measuring input was not implemented correctly in the configura-
tion with non-intelligent sensors.
￭ A crash could be caused when creating common and global variables if
one had selected Text or Date/Time as the type and then pressed on
the tab Limits.
￭ Intelligent units (dosing units, exchange units and sensors) which were
still connected could be overwritten during importing.
￭ If the password was modified directly from the login dialog, then
"zero" was entered as the full name in the audit trail.
￭ In the device configuration of the Avantes spectrometer, the field Sen-
sitivity on the tab Settings could be edited, even though the device
was not connected.
￭ If one wished to delete the entries after the archiving of a large audit
trail (e.g. with more than 100,000 entries), this would take a very long
time.
￭ The display of the number of ports with the multi-port valve was not
dynamically updated in the configuration.
Program Remote Control
￭ The Stop command to the digital output was not executed under cer-
tain circumstances.