Metrohm tiamo 2.3 (process analysis) - Manual (Page 682)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
666 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Window = Measured value
Range
-200.0 ... 200.0 µA
Default value 200.0 µA
Window = Volume
Range
0.00000 ... 9999.99 mL
Default value 9999.99 mL
Window = Time
Range
0 ... 999999 s
Default value 999999 s
Gran evaluation
Note
This evaluation method is possible only with Titrando and 855.
Gran evaluation
on | off (Default value: off)
If this option is enabled, then titration curves will be evaluated in accord-
ance with the Gran Plot procedure(see Chapter 5.6.3.10.4, page 927).
Initial volume
Volume which is present in the measuring vessel before the command is
started.
Range 0.01 ... 9999.99 mL
Default value 50.00 mL
Lower limit
Value for the lower limit of the Gran evaluation range.
Range -200.0 ... 200.0 µA
Default value -200.0 µA
Upper limit
Value for the upper limit of the Gran evaluation range.
Range -200.0 ... 200.0 µA
Default value 200.0 µA