Metrohm tiamo 2.3 (process analysis) - Manual (Page 1419)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1403
Range 0.0 ... 9.9 mm
Default value 2.0 mm
Exchange unit tubing connections
6.6.3.7 Properties - Dosing unit
Tab: Configuration ▶ Titrants/Solutions ▶ Properties... ▶ Dosing unit
Hardware
Name
Freely definable name for the dosing unit.
Input 24 characters
Default value 'empty'
Type
Shows the type of dosing unit:
Selection DU | IDU
DU
Non-intelligent dosing unit without data chip.
IDU
Intelligent 807 Dosing Unit with data chip.