Metrohm tiamo 2.3 (process analysis) - Manual (Page 1489)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1473
6.12 Subwindow Rack data
6.12.1 Configuration - Rack data
Subwindow: Configuration ▶ Rack data
Rack data subwindow
The subwindow Rack data contains the Rack table with all the sample
racks for Metrohm sample changers defined for the client. It can be
shown in a separate window in the program part Configuration as a
part of the Configuration view or (if not present on the desktop) with
View
▶ Quick access. The subwindow can be enlarged and reduced as
required; it can also be maximized.
Display of sample racks
The rack table is empty in the default settings. Sample racks which are
placed on sample processors, are recognized automatically and included
in the rack table. Additional racks can be imported manually.
6.12.2 Rack table
6.12.2.1 Rack table
Subwindow: Configuration ▶ Rack data
Contents
The rack data table shows the following information about the racks con-
figured as standard:
Rack name
Name of the rack.
Rack code
Rack code of the rack.
Number of positions
Number of sample positions on the rack.
Beaker radius samples
Radius of the beakers on the rack.
Beaker sensor
Defines the beaker sensors for the rack.
Device
Shows the devices to which the rack is attached.