Metrohm tiamo 2.3 (process analysis) - Manual (Page 166)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
150 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
￭ Dark orange background
Selected line currently running. If sample data is not to be modified
until after the start of the determination (in the status BUSY), then this
is considered a live modification.
￭ White background
Lines that have not yet been processed. These lines can be edited.
￭ Turquoise background
Selected line not yet processed.
Loaded
Display of the sample table, the data of which has been loaded into the
working sample table. If no sample table has been loaded or if all lines
have been deleted, then this field is empty. If data for a loaded sample
table is modified retroactively or expanded to include new lines, then the
term (modified) will be added to the display of the name.
Toolbar
Save sample table Save the sample table.
Output of PDF file Output the sample table as PDF file.
Reset sample table Reset lines that have been processed, i.e. they can be edited again.
Duplicate Duplicate selected line(s). The new lines are inserted underneath the selected
range.
Increment Increment the selected lines automatically.
Filling Fill the selected lines automatically.
Test sample table Check whether or not all sample data in the sample table is correct.
Window menus
[Edit] contains the following menu items:
Edit line Edit the selected line.
Insert new line Insert a new empty line above the line selected.
Cut lines Cut the selected lines and transfer them to the clipboard.
Copy lines Copy the selected lines to the clipboard.