Metrohm tiamo 2.3 (process analysis) - Manual (Page 1288)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1272 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Parameters
The parameters for the command REQUEST are configured in the follow-
ing dialog window:
￭ REQUEST
Command variables
The following command variables are generated in the method run by the
command REQUEST and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
5.6.10.2.2 REQUEST - Properties
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - Data input #
Command name
Name of the command.
Input 25 characters
Sample data request
The sample types that are not to be entered until after the determination
starts can be selected In the dialog window REQUEST - Data input #.
The dialog window Sample data request,, in which the sample parame-
ters selected in the command are to be queried, appears in the method
run during the execution of the command. The run is stopped until the
input is confirmed.