Metrohm tiamo 2.3 (process analysis) - Manual (Page 225)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 209
Start backup automatically
on | off (Default value: off)
Automatic start of the backup for the database in the defined Backup
directory.
Backup directory
Selection of a folder predefined in the Program administration for the
automatic backup.
Selection Selection of the backup directory | Default
backup directory
Default value Default backup directory
Note
Make sure that you have read and write access rights on the selected
directory.
4.3.5.5 Database properties - Monitoring
Tab: Database ▶ File ▶ Database manager... ▶ Database manager ▶ [Proper-
ties] ▶ Properties - Database - 'Database name' ▶ Monitoring
Defines database monitoring.
Monitoring size
on | off (Default value: off)
Enables/disables size monitoring for the selected database. If this check
box is activated then the field Size in the Database table will be shown in
red when the limit value has been exceeded. A corresponding message
also appears when the database is opened.
Maximum size
Maximum permitted database size in MB.
Range 1 ... 2147483647 MB
Default value 500 MB
Monitoring number of records
on | off (Default value: off)
Enables/disables the monitoring of the number of data sets for the selec-
ted database. If this check box is activated then the field Number in the
Database table will be shown in red when the limit value has been excee-
ded. A corresponding message also appears when the database is
opened.