Metrohm tiamo 2.3 (process analysis) - Manual (Page 1298)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1282 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
The input field contains the expression for the condition(s) which can be
created or edited with the formula editor after pressing on or double-
clicking in the text field (see Chapter 2.4, page 29). If the condition is ful-
filled (evaluation of the formula gives the result 1 = true), then the loop
will be canceled when the LOOP command is called.
Input 1000 characters
Default value 'empty'
5.6.10.5 WAIT
5.6.10.5.1 WAIT - Overview
Dialog window: Method ▶ WAIT ▶ Properties... ▶ WAIT - 'Command name'
Command for halting the method run and for output of messages.
Appearance
The command has the following appearance:
Parameters
The parameters for the command WAIT are configured in the following
dialog window:
￭ WAIT
Command variables
The following command variables are generated in the method run by the
command WAIT and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended