Metrohm tiamo 2.3 (process analysis) - Manual (Page 1246)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1230 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Range 0.001 ... 9.999
Default value 1.000
Gas flow
Inlet
Selection of the inlet of the carrier gas
Selection Pump | Valve
Default value Pump
Pump
Use of ambient air as carrier gas.
Valve
Use of gas out of a compressed gas cylinder.
Flow rate
874
Range
10 ... 150 mL/min
Default value 50 mL/min
Gas flow
Selection Switch on | Switch off
Default value Switch on
Switch on
Switches on the gas flow.
Switch off
Switches off the gas flow.
5.6.7.10 RLS DEV
5.6.7.10.1 RLS DEV - Overview
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Device name'
Command to release a device for using it in other parallel running meth-
ods. It removes the reservation made by the current method.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance: