Metrohm tiamo 2.3 (process analysis) - Manual (Page 352)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
336 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Note
If a result value is being monitored and lies inside the limits defined in
the CALC command then the text will be shown in green, if it lies out-
side the limits the value will be shown in red.
4.5.2.6.5.2 Result view - Raw data
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Result dis-
play ▶ Raw data
On the tab Raw data of the subwindow Result view the raw data gen-
erated in commands with evaluations will be shown and updated at each
recalculation.
If several determinations are selected for reprocessing then the navigation
buttons can be used to switch between the result view of the individual
determinations:
Jump to the first determination.
Jump to the previous determination.
Jump to the next determination.
Jump to the last determination.
4.5.2.6.6 Modification comment for determinations
Dialog window: Database ▶ Determinations ▶ Delete/Reprocess...
If the option Comment on modification of determinations is switched
on in the security settings then before the modified sample data is accep-
ted the window Modification comment determination first appears in
which a Reason must be selected and a Comment on the modification
must be entered.
Reason
Selection from the default reasons defined for the category Modifica-
tions of determinations in the Security settings dialog window.
Selection Selection from default reasons
Comment
Entry of a comment on the modification of the determinations.