Metrohm tiamo 2.3 (process analysis) - Manual (Page 1347)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1331
Selection on | off
Default value off
FDA default: off (editable)
Note
If the automatic logout is switched on (see below), then only the same
user or a user with administrator rights can log on again, no matter
what the setting for this option is.
No editing of workplaces in 'BUSY' status
If this check box is activated then, after a user has logged out manually,
a newly logged-in user on the workplaces still open with running determi-
nations can neither edit data nor trigger actions. These workplaces will
only be available again when all determinations are finished. For running
determinations the old user name always applies (Audit Trail entries, Save,
Export, etc.). Exceptions are the stop of a determination with [Stop] and
the emergency stop, which are always possible for all running determina-
tions and series.
If this check box is deactivated, then the newly registered user has all of
the rights for the opened workplaces which he has on the basis of his
group membership. The new user name is valid, effective immediately, for
the ongoing determinations (Audit Trail entries, Save, Export, etc.).
Selection on | off
Default value off
FDA default: off (editable)
Automatic logout after
If this check box is activated then the user will be logged out automati-
cally when no operating functions have been carried out with the key-
board or the mouse within this time. After this automatic logout, only a
member of the same user group as the one to which the previously log-
ged-off user belongs or a user with administrator rights can log in again.
Selection on | off
Default value off
FDA default: off (editable)
Range 1 ... 60 min
Default value 10 min
FDA default: 10 min (editable)