Metrohm tiamo 2.3 (process analysis) - Manual (Page 1386)

6.4 Audit Trail ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1370 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Display of the selected set #### - #### of entries in the Audit Trail table.
If the table has not been filtered then the total number of entries will also
appear. If the table has been filtered then the total number of filtered
entries will appear with the info (filtered).
Moves to next set of entries in the Audit Trail table.
Jumps to last set of entries in the Audit Trail table.
6.4.1.7 Audit Trail - Functions
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
In the Audit Trail program window the following functions can be car-
ried out:
￭ Filter Audit Trail
￭ Update Audit Trail
￭ Export Audit Trail
￭ Archive Audit Trail
￭ Delete Audit Trail
￭ Print Audit Trail
6.4.2 Audit Trail table
6.4.2.1 Audit-Trail - Table
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
Open
The Audit-Trail table is opened with Tools
▶ Audit Trail... or with the
symbol in the Configuration program part.
Note
The table can be opened only if the option Enable Audit Trail is
switched on in the security settings (see Chapter 6.2.2.4, page 1333).
Contents
In the Audit Trail table, the following information regarding user actions is
displayed in the default settings:
Type
Symbol for characterizing the action: