Metrohm tiamo 2.3 (process analysis) - Manual (Page 1361)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1345
[OK]
The dialog window Save for saving data opens, in which the name and
directory for the export file must be entered. The selected configuration
data is then saved in a file with the extension .mcfg.
6.3.1.2 Importing configuration data
Dialog window: Configuration ▶ File ▶ Import… ▶ Import configuration data
With File ▶ Import... and after selection of the file *.mcfg to be impor-
ted, the dialog window Import configuration data opens, in which the
following parts of the configuration database can be selected for import:
Note
Data that is not present in the export file cannot be selected.
Devices
on | off (Default value: on)
Import configuration data for devices (see Chapter 6.5.1, page 1382).
Titrants/Solutions
on | off (Default value: on)
Import configuration data for titrants and solutions (see Chapter 6.6.2.1,
page 1388).
Sensors
on | off (Default value: on)
Import configuration data for sensors (see Chapter 6.7.2.1, page 1411).
Common Variables
on | off (Default value: on)
Import configuration data for common variables (see Chapter 6.9.1, page
1447).
Global Variables
on | off (Default value: on)
Import configuration data for global variables (see Chapter 6.10, page
1456).