Metrohm tiamo 2.3 (process analysis) - Manual (Page 1282)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1266 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
[Delete]
Deletes the selected transfer command.
Timeout
on | off (Default value: off)
If this option is activated, then a maximum waiting time can be entered. If
not all transfer commands have finished after this time period, the com-
mand is canceled and the next command is started.
Range 0 ... 9999.9
Default value 1
Selection min | s
Default value s
5.6.9.6.3 TRANSFER - Transfer command
Dialog window: Method ▶ TRANSFER ▶ Properties... ▶ Transfer command
Name
Freely definable name for the transfer command.
Input 50 characters
Action
Selection Read | Write | Wait for | Poll
Default value Read
Read
The character string defined in Command (optional) will be sent to the
device and the answer of the device is expected within the Timeout
defined for the device settings and evaluated.
Write
The character string defined in Command (optional) will be sent to the
device.
Wait for
The character string defined in Command (optional) will be sent to the
device, after which there is a waiting period until a received character
string corresponds to the regular expression in Comparison. If this
answer is not received within the Timeout defined in the command,
then the command is canceled.