Metrohm tiamo 2.3 (process analysis) - Manual (Page 66)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Designation Description Commands
.SVS Start volume slope (volume that
was added according to the start
condition "start slope") in mL DET, MET
.SVT Total start volume (volume that
was added in dependence on all
three start conditions) in mL DET, MET, SET,
KFT, STAT
.TC.TC Temperature coefficient of the
conductivity in %/°C MET Cond, MEAS
Cond, CAL Cond
.TC.C0 Coefficient of the Chebyshev poly-
nomial of conductivity of the zer-
oth order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C1 Coefficient of the Chebyshev poly-
nomial of conductivity of the first
order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C2 Coefficient of the Chebyshev poly-
nomial of conductivity of the sec-
ond order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C3 Coefficient of the Chebyshev poly-
nomial of conductivity of the third
order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.C4 Coefficient of the Chebyshev poly-
nomial of conductivity of the
fourth order MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.MIN Minimum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.MAX Maximum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTART Start temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTOP Stop temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond