Metrohm tiamo 2.3 (process analysis) - Manual (Page 1485)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1469
Modify the sequence of the displayed columns by moving the selected
column up.
Modify the sequence of the displayed columns by moving the selected
column down.
6.11.2.5 Printing the solution list
Dialog window: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Print
(PDF)… ▶ Print list of sample solutions (TC conductivity) (PDF)
[Edit] ▶ Print (PDF)… opens the dialog window Print list of solutions
(PDF).
Orientation
Selection
Portrait format | Landscape format
Default value Portrait format
Portrait format
Output of the table in portrait format.
Landscape format
Output of the table in landscape format.
[OK]
The table is shown in the required format as a PDF file and can be opened
directly with Acrobat Reader; it can then be printed and/or saved.
6.11.3 Sample solutions (TC conductivity) properties
6.11.3.1 Editing properties
Dialog window: Configuration ▶ Sample solutions (TC conductiv-
ity) ▶ [Edit] ▶ Properties… ▶ Sample solution (TC conductivity)
The parameters for the selected line are defined on the following tabs:
￭ General
General properties.
￭ TC data
Data for TC determination and monitoring.
6.11.3.2 Properties - General
Tab: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Proper-
ties... ▶ Sample solution (TC conductivity) ▶ General
Name
Name of the measuring solution for which the temperature coefficient for
conductivity is determined.