Metrohm tiamo 2.3 (process analysis) - Manual (Page 1590)

7.15 Avantes Spectrometer ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1574 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
[Update]
Opens the dialog window Load new program version (see Chapter
7.1.6, page 1488).
This button is only displayed with devices that have their own firmware. It
is only active if the device has an old program version not supported by
tiamo and which can be updated by tiamo itself.
Device serial number
Shows the serial number of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Data storage under legal control
Indicates whether the balance has its own data storage under legal con-
trol.
Only visible and editable with Sartorius balances
Selection
on | off
Default value off
Remarks
Remarks about the device.
Input 1000 characters
Default value empty
7.15.3 Properties - Settings
Tab: Configuration ▶ Device ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Settings
Light source
Type
Type of light source used.
Selection continuous | pulsed
Default value continuous
Pulses per integration time
Frequency the light flashes with. This parameter can only be edited for the
Type = pulsed.
Range 0 ... 1000
Default value 10