Metrohm tiamo 2.3 (process analysis) - Manual (Page 1627)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1611
Range -214783647 ... 214783647
Default value 0
7.20.6 Properties - Analog inputs
On the tab Analog inputs all inputs detected are automatically listed in a
table. For each analog input the settings can be modified.
Port
Display of the internal description of the port.
Port description
Display of the port description.
Type
Display of the port type.
Low level (0%)
Display of the lowest analog input value with unit.
High level (100%)
Display of the highest analog input value with unit.
0% Mapping
Measured value to be used when the Low level (0%) is applied as input
value, with unit.
100% Mapping
Measured value to be used when the High level (100%) is applied as
input value, with unit.
[Edit]
Opens the dialog Properties Analog input in order to edit the selected
port.
[Port description]
Opens a menu in order to import or export port descriptions.
The menu [Port description] contains the following menu items:
Import Import of a text file (TXT, CSV) containing the port description. Each line is inter-
preted as port description, spaces will be ignored.
Export Export a text file containing the port descriptions of all digital inputs.